Knowledge Base Glossary   
 
   
Browse by Category
Knowledge Base > Hardware Lock issues > Error Number: 9101 - Hardware Lock Driver Initialisation Error (APSDS 5.0)

Error Number: 9101 - Hardware Lock Driver Initialisation Error (APSDS 5.0)

If you have a Hardware Lock for APSDS 5.0, you need to install a special driver.
(Note: if you are evaluating APSDS 5.0 you do not need to install the driver.)

If you have installed APSDS 5.0 from a CD-ROM, load the CD-ROM. When the menu appears, click on the menu item “Install Sentinel System Driver”.

If you do not have a APSDS 5.0 CD-ROM, download and install the following driver:

 Sentinel System Driver - Latest Version
Article 045
Created 24-Jul-2007
Modified 13-Oct-2009
Author admin
Rating (None)

How helpful was this article to you?

Related Articles

Error Number: 9101 - Hardware Lock Driver Initialisation Error (CIRCLY 5.0)
If you have a Hardware Lock for CIRCLY, you need to install a special driver.(Note: if you are...
 
Error Number: 9101 -Hardware Lock Driver Initialisation Error (HIPAVE 5.0)
If you have a Hardware Lock for HIPAVE 5.0, you need to install a special driver. (Note: if...
Error Number: 9101 - Hardware Lock Driver Initialisation Error (APSDS 5.0)
If you have a Hardware Lock for APSDS, you need to install a special driver. (Note: if you are...
Error Number: 9201 - Hardware Lock has not been activated to run APSDS 5.0
If you have purchased an upgrade to APSDS 5.0 to use on an existing hardware lock: You must key...
Error Number: 9105 - Hardware Lock error - more than one Mincad Systems Hardware Lock is connected
You have more than one Mincad Systems Hardware Lock connected to your computer. Please unplug...


powered by Lore