Hardware Lock issues .: Knowledge Base

APSDS Error Number 9204 - Hardware Lock Licence has expired
Your Renewable Licence has expired.A Renewable Licence requires payment of an annual renewal fee...

CIRCLY Error Number 9204 - Hardware Lock Licence has expired
Your Renewable Licence has expired.A Renewable Licence requires payment of an annual renewal...

Error Number: 9101 - Hardware Lock Driver Initialisation Error (APSDS 5.0)
If you have a Hardware Lock for APSDS 5.0, you need to install a special driver. (Note: if...

Error Number: 9101 - Hardware Lock Driver Initialisation Error (APSDS 5.0)
If you have a Hardware Lock for APSDS, you need to install a special driver. (Note: if you are...

Error Number: 9101 - Hardware Lock Driver Initialisation Error (CIRCLY 5.0)
If you have a Hardware Lock for CIRCLY, you need to install a special driver.(Note: if you are...

Error Number: 9101 -Hardware Lock Driver Initialisation Error (HIPAVE 5.0)
If you have a Hardware Lock for HIPAVE 5.0, you need to install a special driver. (Note: if...

Error Number: 9102 - Hardware Lock is not present
Under normal circumstances a single user licence for CIRCLY, HIPAVE or APSDS requires you to...

Error Number: 9103 - Hardware Lock User ID has not been set
Please get in touch with Mincad Systems or your local agent to arrange a replacement for your...

Error Number: 9104 - Hardware Lock gives unknown response
Please get in touch with Mincad Systems or your local agent to arrange a replacement for your...

Error Number: 9105 - Hardware Lock error - more than one Mincad Systems Hardware Lock is connected
You have more than one Mincad Systems Hardware Lock connected to your computer. Please unplug...

Error Number: 9106 - Hardware Lock reported as Lost or Replaced
Your Hardware Lock has been reported as lost or replaced.

Error Number: 9201 - Hardware Lock has not been activated to run APSDS 5.0
If you have purchased an upgrade to APSDS 5.0 to use on an existing hardware lock: You must key...

Error Number: 9201 - Hardware Lock has not been activated to run HIPAVE 5.0
If you have purchased an upgrade to HIPAVE 5.0 to use on an existing hardware lock: You must...

Error Number: 9201 - Hardware Lock has not been activated to run Version 4.1 or greater
A. If you are using a CIRCLY 5.0 version prior to CIRCLY 5.0f (27 June 2005):The symptoms are...

Error Number: 9202 - Hardware Lock gives invalid response for this program
Please get in touch with Mincad Systems or your local agent to arrange a replacement for your...

Error Number: 9203 - Attempting to access Hardware Lock by Remote Connection
Under normal circumstances a single user licence for CIRCLY, HIPAVE or APSDS requires...

HIPAVE Error Number 9204 - Hardware Lock Licence has expired
Your Renewable Licence has expired.A Renewable Licence requires payment of an annual renewal fee...